All the tooling listed below can be used on our standard Bar Champ, Servo Auto Champ 2 and also fully Automatic Chamfering Systems. There are some applications where special tooling is required and our standard tooling may not work on those setups.
|5069||30-Degree Chamfer Tool. Includes standard 3/4" carbide insert. Note that one is included with the Bar Champ.|
|5069-1||45-Degree Chamfer Tool. Includes standard 3/4" carbide insert.|
|5069-60||60-Degree Chamfer Tool. Includes standard 3/4" carbide insert.|
|5069-XX||Special Angle Chamfer Tool. XX = special angle required. Includes standard 3/4" carbide insert.|
|5279||Turn and Chamfer Toolholder, 1" turn depth. Includes two triangular carbide inserts.|
|5279-X||Turn and Chamfer Toolholder, special turn depth. X.XXX = turn depth required. Standard depths include 0.750", 1.250", 1.750", 2.000". Special lengths up to 2.5" available. Includes two triangular carbide inserts. For part number please contact JF Berns Company.|
|5070||Facing Tool, for bar stock sizes 5/16" - 1.5". Includes one 8-sided carbide insert.|
|5290||Face and Chamfer, 30 degree. Face with a 30 degree chamfer, for bar stock sizes 5/16" - 1.5", includes two 8-sided carbide inserts.|
|5291||Face and Chamfer, 45 degree. Face with a 45 degree chamfer, for bar stock sizes 5/16" - 1.5", includes two 8-sided carbide inserts.|
|300-3||D-OD-FACE Tubing Chamfer Head.Inner Diameter 30 degree chamfer, Outer Diameter 30 chamfer and Faces tube. Includes three triangular carbide inserts.|
|Center Drill||Consult with factory for Center Drill and other drill tooling.|
* Specially designed tooling available. Please give us a call to discuss your application.